Introduction of Technical Advantage

1. Investment Molding

* Aluminum ingot that imports form Australia (COMALCO Corporation) is processed by advanced investment molding equipment, and the quality has come up to international standard.

* Monlthly output is 1800T.

* Compound Material.
1) Heat-sinking effect has improved 20%-25% than ALUMINIUM6063.
2) Self-lubrication Alloy: Excellent performance, low cost, can replace fan ball bearing.

2. Mold

* Enjoy over 50 professional designers and manufacturing engineers.
* Most advanced processing facilities.
* High-speed die sinking.

	* High-speed milling and sharpening: 42000rotation / minute. * Mold steel can be processed after heat treatment. * Precission can be guaranteed to be under 0.01mm.
	* Precission is 0.003mm.

3. Aluminum Extrusion

* High-multiple Radiating
Fin Thickness of Fin: 0.4mm (MIN)
Space of Fin: 1.2mm (MIN)
Density of Fin: 36片fins / 60mm (MAX)
Heat-sinking Thickness of Radiating Fin Bottom: 10mm (MAX)
Tongue Ratio (Ration between height and space of fin): 26 times (MAX)

* VAPOR CHAMBER HEAT SINK
In a vacuum chamber, working fluid evaporates due to heating. Then it moves from the base to the radiating area, where vaporized fluid is cooled into condensate. Finally, condensed fluid returns to the heat source under capillary action. Using this cycle, heat is transferred withing the heat sink.

* Seamless Tube

4. Process and Anode

* Have many dissecting machine.
* Anode Finish

5. Patent

* Compound Material
* Seamless Tube
* High-multiple Aluminum Extrusion
* Cold-forging Technology
* VAPOR CHAMBER HEAT SINK